Top

  1. 实现 AP 自动注册
  2. 配置 WLAN 业务参数

1 实现 AP 自动注册

1.1 需求

1）企业内网的大量 AP 已经通过 DHCP 的方式获得 IP 地址

2）为了实现后期大量 AP 的统一管理，希望通过 AC 实现集中控制

3）在 AC 设备上，为了便于设备管理，按照统一的命名格式

1.2 方案

搭建实验环境，如图 - 1 所示。

CASE - 图1

图 - 1

1.3 步骤

实现此案例需要按照如下步骤进行。

1）配置 DHCP 服务器，为 AP 分配 AC 服务器的 IP 地址

  3. 1.  \[DHCP\]ip pool VLAN100    
  4. 2.  \[DHCP-ip-pool-VLAN100\]option 43 sub-option  3 ascii 192.168.200.1
  5. 3.  \[DHCP-ip-pool-VLAN100\]quit

2）配置网关，实现 AC 和 AP 互通

  3. 1.  \[SW2\]vlan 100
  4. 2.  \[SW2-vlan100\]quit
  6. 4.  \[SW2\]interface GigabitEthernet 0/0/10
  7. 5.  \[SW2-GigabitEthernet0/0/10\]port link-type access
  8. 6.  \[SW2-GigabitEthernet0/0/10\]port default vlan  200
  9. 7.  \[SW2-GigabitEthernet0/0/10\]quit
  11. 9.  \[SW2\]interface Vlanif 200
  12. 10.  \[SW2-Vlanif200\]ip address 192.168.200.254 24
  13. 11.  \[SW2-Vlanif200\]quit
  15. 13.  \[AC6605\]vlan 200
  16. 14.  \[AC6605-vlan200\]quit
  18. 16.  \[AC6605\]interface GigabitEthernet 0/0/10    
  19. 17.  \[AC6605-GigabitEthernet0/0/10\]port link-type access    
  20. 18.  \[AC6605-GigabitEthernet0/0/10\]port default vlan 200
  21. 19.  \[AC6605-GigabitEthernet0/0/10\]quit
  23. 21.  \[AC6605\]interface Vlanif 200
  24. 22.  \[AC6605-Vlanif200\]ip address 192.168.200.1 24
  25. 23.  \[AC6605-Vlanif200\]quit
  27. 25.  \[AC6605\]ip route-static 0.0.0.0 0 192.168.200.254

3）配置 AC，离线导入 AP，实现 AP 注册

  3. 1.  \[AC6605\]wlan
  5. 3.  \[AC6605-wlan-view\]ap-group name wailai
  6. 4.  \[AC6605-wlan-ap-group-wailai\]quit
  8. 6.  \[AC6605-wlan-view\]ap-group name neibu
  9. 7.  \[AC6605-wlan-ap-group-neibu\]quit
  11. 9.  \[AC6605-wlan-view\]regulatory-domain-profile name China
  12. 10.  \[AC6605-wlan-regulate-domain-China\]country-code CN 
  13. 11.  \[AC6605-wlan-regulate-domain-China\]quit
  15. 13.  \[AC6605-wlan-view\]ap-group name wailai
  16. 14.  \[AC6605-wlan-ap-group-wailai\]regulatory-domain-profile China
  17. 15.  Warning: Modifying the country code will clear channel, power and antenna gain c
  18. 16.  onfigurations of the radio and reset the AP. Continue?\[Y/N\]:y
  19. 17.  \[AC6605-wlan-ap-group-wailai\]quit
  21. 19.  \[AC6605-wlan-view\]ap-group name neibu
  22. 20.  \[AC6605-wlan-ap-group-neibu\]regulatory-domain-profile China
  23. 21.  Warning: Modifying the country code will clear channel, power and antenna gain c
  24. 22.  onfigurations of the radio and reset the AP. Continue?\[Y/N\]:y
  25. 23.  \[AC6605-wlan-ap-group-neibu\]quit
  27. 25.  \[AC6605-wlan-view\]ap auth-mode mac-auth 
  28. 26.  \[AC6605-wlan-view\]ap-id 1 ap-mac 00e0-fc9d-1580
  29. 27.  \[AC6605-wlan-ap-1\]ap-name wailai-1
  30. 28.  \[AC6605-wlan-ap-1\]ap-group wailai
  31. 29.  Warning: This operation may cause AP reset. If the country code changes, it will
  32. 30.   clear channel, power and antenna gain configurations of the radio, Whether to c
  33. 31.  ontinue? \[Y/N\]:y
  34. 32.  \[AC6605-wlan-ap-1\]quit
  36. 34.  \[AC6605-wlan-view\]ap-id 2 ap-mac 00e0-fc60-4c70
  37. 35.  \[AC6605-wlan-ap-2\]ap-name wailai-2
  38. 36.  \[AC6605-wlan-ap-2\]ap-group wailai
  39. 37.  Warning: This operation may cause AP reset. If the country code changes, it will
  40. 38.   clear channel, power and antenna gain configurations of the radio, Whether to c
  41. 39.  ontinue? \[Y/N\]:y
  42. 40.  \[AC6605-wlan-ap-2\]quit
  44. 42.  \[AC6605-wlan-view\]ap-id 3 ap-mac 00e0-fc56-6320
  45. 43.  \[AC6605-wlan-ap-3\]ap-name neibu-1
  46. 44.  \[AC6605-wlan-ap-3\]ap-group neibu
  47. 45.  Warning: This operation may cause AP reset. If the country code changes, it will
  48. 46.   clear channel, power and antenna gain configurations of the radio, Whether to c
  49. 47.  ontinue? \[Y/N\]:y
  50. 48.  \[AC6605-wlan-ap-3\]quit
  52. 50.  \[AC6605-wlan-view\]ap-id 4 ap-mac 00e0-fc4e-2fd0
  53. 51.  \[AC6605-wlan-ap-4\]ap-name neibu-2
  54. 52.  \[AC6605-wlan-ap-4\]ap-group neibu
  55. 53.  Warning: This operation may cause AP reset. If the country code changes, it will
  56. 54.   clear channel, power and antenna gain configurations of the radio, Whether to c
  57. 55.  ontinue? \[Y/N\]:y
  58. 56.  \[AC6605-wlan-ap-4\]quit
  60. 58.  \[AC6605\]capwap source interface Vlanif 200

2 配置 WLAN 业务参数

2.1 需求

1）基于分配好的 IP 方案，为不同的无线终端，动态分配 IP 地址

2）配置 AC，为不同的 AP 下发不同的配置，确保可以发射无线信号

3）实现不同的 “无线终端” 可以成功连接 AP ，并成功获得 IP 地址

4）实现不同的 “无线终端” 之间的互通

2.2 方案

搭建实验环境，如图 - 3 所示。

CASE - 图2

图 - 3

2.3 步骤

实现此案例需要按照如下步骤进行。

1）配置 AC 上的相关业务参数

  3. 1.  \[AC6605\]vlan pool wailai
  4. 2.  \[AC6605-vlan-pool-wailai\]vlan 101 102
  5. 3.  \[AC6605-vlan-pool-wailai\]quit
  7. 5.  \[AC6605\]vlan pool neibu
  8. 6.  \[AC6605-vlan-pool-neibu\]vlan 103 104
  9. 7.  \[AC6605-vlan-pool-neibu\]quit
  11. 9.  \[AC6605\]wlan
  12. 10.  \[AC6605-wlan-view\]security-profile name wailai
  13. 11.  \[AC6605-wlan-sec-prof-wailai\]security wpa2 psk pass-phrase a123456789 aes
  14. 12.  \[AC6605-wlan-sec-prof-wailai\]quit
  16. 14.  \[AC6605-wlan-view\]security-profile name neibu
  17. 15.  \[AC6605-wlan-sec-prof-neibu\]security wpa2 psk pass-phrase b123456789 aes
  18. 16.  \[AC6605-wlan-sec-prof-neibu\]quit
  20. 18.  \[AC6605-wlan-view\]ssid-profile name wailai
  21. 19.  \[AC6605-wlan-ssid-prof-wailai\]ssid wailai
  22. 20.  \[AC6605-wlan-ssid-prof-wailai\]quit
  24. 22.  \[AC6605-wlan-view\]ssid-profile name neibu
  25. 23.  \[AC6605-wlan-ssid-prof-neibu\]ssid neibu
  26. 24.  \[AC6605-wlan-ssid-prof-neibu\]quit
  27. 25.  \[AC6605-wlan-view\]quit
  29. 27.  \[AC6605-wlan-view\]vap-profile name wailai
  30. 28.  \[AC6605-wlan-vap-prof-wailai\]security-profile wailai
  31. 29.  \[AC6605-wlan-vap-prof-wailai\]ssid-profile wailai
  32. 30.  \[AC6605-wlan-vap-prof-wailai\]service-vlan vlan-pool wailai
  33. 31.  \[AC6605-wlan-vap-prof-wailai\]quit
  35. 33.  \[AC6605-wlan-view\]vap-profile name neibu
  36. 34.  \[AC6605-wlan-vap-prof-neibu\]security-profile neibu
  37. 35.  \[AC6605-wlan-vap-prof-neibu\]ssid-profile neibu
  38. 36.  \[AC6605-wlan-vap-prof-neibu\]service-vlan vlan-pool neibu
  39. 37.  \[AC6605-wlan-vap-prof-neibu\]quit
  41. 39.  \[AC6605-wlan-view\]ap-group name wailai
  42. 40.  \[AC6605-wlan-ap-group-wailai\]vap-profile wailai wlan 1 radio 0
  43. 41.  \[AC6605-wlan-ap-group-wailai\]vap-profile wailai wlan 1 radio 1
  44. 42.  \[AC6605-wlan-ap-group-wailai\]quit
  46. 44.  \[AC6605-wlan-view\]ap-group name neibu
  47. 45.  \[AC6605-wlan-ap-group-neibu\]vap-profile neibu wlan 1 radio 0
  48. 46.  \[AC6605-wlan-ap-group-neibu\]vap-profile neibu wlan 1 radio 1
  49. 47.  \[AC6605-wlan-ap-group-neibu\]quit
  50. 48.  \[AC6605-wlan-view\]quit

2）配置 DHCP 服务器，为无线终端用户分配 IP 地址

  3. 1.  \[DHCP\]ip pool VLAN101
  4. 2.  \[DHCP-ip-pool-VLAN101\]network  192.168.101.0 mask 24
  5. 3.  \[DHCP-ip-pool-VLAN101\]gateway-list  192.168.101.254
  6. 4.  \[DHCP-ip-pool-VLAN101\]dns-list 8.8.8.8
  7. 5.  \[DHCP-ip-pool-VLAN101\]quit
  9. 7.  \[DHCP\]ip pool VLAN102
  10. 8.  \[DHCP-ip-pool-VLAN102\]network  192.168.102.0 mask 24
  11. 9.  \[DHCP-ip-pool-VLAN102\]gateway-list  192.168.102.254
  12. 10.  \[DHCP-ip-pool-VLAN102\]dns-list 8.8.8.8
  13. 11.  \[DHCP-ip-pool-VLAN102\]quit
  15. 13.  \[DHCP\]ip pool VLAN103
  16. 14.  \[DHCP-ip-pool-VLAN103\]network  192.168.103.0 mask 24
  17. 15.  \[DHCP-ip-pool-VLAN103\]gateway-list  192.168.103.254
  18. 16.  \[DHCP-ip-pool-VLAN103\]dns-list 8.8.8.8
  19. 17.  \[DHCP-ip-pool-VLAN103\]quit
  21. 19.  \[DHCP\]ip pool VLAN104
  22. 20.  \[DHCP-ip-pool-VLAN104\]network  192.168.104.0 mask 24
  23. 21.  \[DHCP-ip-pool-VLAN104\]gateway-list  192.168.104.254
  24. 22.  \[DHCP-ip-pool-VLAN104\]dns-list 8.8.8.8
  25. 23.  \[DHCP-ip-pool-VLAN104\]quit

3）配置 DHCP 中继（SW2）

  3. 1.  \[SW2\]vlan batch  101 102 103 104
  5. 3.  \[SW2\]interface Vlanif  101
  6. 4.  \[SW2-Vlanif101\]ip address 192.168.101.254 24
  7. 5.  \[SW2-Vlanif101\]dhcp select relay 
  8. 6.  \[SW2-Vlanif101\]dhcp relay  server-ip 192.168.210.1
  9. 7.  \[SW2-Vlanif101\]quit
  11. 9.  \[SW2\]interface Vlanif  102
  12. 10.  \[SW2-Vlanif102\]ip address 192.168.102.254 24
  13. 11.  \[SW2-Vlanif102\]dhcp select relay 
  14. 12.  \[SW2-Vlanif102\]dhcp relay  server-ip 192.168.210.1
  15. 13.  \[SW2-Vlanif102\]quit
  17. 15.  \[SW2\]interface Vlanif  103
  18. 16.  \[SW2-Vlanif103\]ip address 192.168.103.254 24
  19. 17.  \[SW2-Vlanif103\]dhcp select relay 
  20. 18.  \[SW2-Vlanif103\]dhcp relay  server-ip 192.168.210.1
  21. 19.  \[SW2-Vlanif103\]quit
  23. 21.  \[SW2\]interface Vlanif  104
  24. 22.  \[SW2-Vlanif104\]ip address 192.168.104.254 24
  25. 23.  \[SW2-Vlanif104\]dhcp select relay 
  26. 24.  \[SW2-Vlanif104\]dhcp relay  server-ip 192.168.210.1
  27. 25.  \[SW2-Vlanif104\]quit

4）配置 SW1，确保无线终端可以通过 SW1 与 网关（SW2）互通

  3. 1.  \[SW1\]vlan batch  101 102 103 104

https://tts.tmooc.cn/ttsPage/NTD/NTDTN202109/TCNE/DAY07/CASE/01/index.html