1. 三菱MELCOSIM IGBT模块及IPM模块等功率器件功耗仿真及选型软件说明及下载
    MELCOSIM是一款三菱IGBT模块损耗计算及功率器件选型软件。该软件可以通过饱和压降特性和开关特性计算IGBT& FWD上的总功耗，通过总功耗和热阻计算结温，最后评价计算出的结温是否满足设计需求。本版本继承以往仿真软件快速计算，结构化输入输出窗口，图表式功率输出等优点的前提下新增了温度纹波曲线计算功能。This software is the power loss simulation for inverter system named “Melcosin”.转载请注明出处 http://www.igbt8.com
    This document is explained for operation of the Mitsubishi Power Module Loss Simulator “Melcosim” for 2-level inverter and 3-Level inverter.
    功耗仿真软件下载
    功耗仿真软件可以用来计算三菱电机IGBT模块和IPM在VVVF变频电路中的功率损耗，该软件运行环境为Windows2000或以上的操作系统。
    2 英飞凌IPOSIM7.4IGBT模块功耗仿真及选型软件说明及下载

两/三电平功耗仿真软件

资料名称 文件类型 文件大小 更新时间 下载
两/三电平功耗仿真软件 ZIP 12.3MB 2013-12-30 三菱_英飞凌_富士IGBT功率器件功耗仿真软件 - 图1
两/三电平功耗仿真软件说明书 PDF 3.01MB 2013-5-17 三菱_英飞凌_富士IGBT功率器件功耗仿真软件 - 图2

Dimensioning program IPOSIM for loss and thermal calculation ofeupec modules

三菱_英飞凌_富士IGBT功率器件功耗仿真软件 - 图3 IPOSIM7.4软件下载及使用说明
  1. 富士IGBT模块及IPM模块等功率器件功耗仿真及选型软件说明及下载

􀂾 IPOSIM performs an approximate calculation of switching and conduction losses for IGBTs and free-wheeling diodes in a three phase inverter configuration.
􀂾 IPOSIM works under the assumption of a sinusoidal output current and uses linear approximation
􀂾 IPOSIM is a quick selection tool for eupec IGBT modules
image.png
The calculation results in diagrams which are showing an estimation of
􀂾 the average power losses versus the RMS phase leg current at sinusoidal currents
􀂾 the temperature distribution between junction and ambient
􀂾 loss distribution (static and dynamic losses)
􀂾 calculation of complete load cycles
Thermal limits of IGBT and diode part of the module are considered. IPOSIM applies an easy to use, fast and at the same time relatively exact method under sinusoidal output conditions. This fulfils the engineers need for first estimations on losses and thermal limits of the considered IGBT module.

三菱_英飞凌_富士IGBT功率器件功耗仿真软件 - 图5 富士IGBT损耗模拟软件V5.1