What Is It
The car shield bridges the micro:bit with a series of Grove Zero modules to extend the functions of micro:bit. The shield incorporates a battery, a buzzer and 4 RGB LEDs, as well as a GND and P2 connection ports which are same as those of the micro:bit.
How It Works
Slide the micro:bit into the car shield, then the shield becomes an amazing G0 control board that is able to control G0 modules through a snap-together connection. Besides, the control board itself comes with a built-in buzzer, addressable RGB LEDs and a rechargeable battery.
Only use the 5V micro USB cable for charging the li-ion battery, not for the micro:bit!
Try adding the Grove Zero extension on MakeCode for programingm your micro: bit and the Grove Zero modules!
Adding Grove Zero Extension
See 2.3 Bit Kit
Safety Precaution
- Battery belongs to dangerous items; be careful when using it.
- Do not expose the battery in high temperature and high pressure; store it in a dry and cool place.
- Do not attempt to hammer, pierce, drop or expose the battery in sunlight.
- Use only the included USB cable to charge the battery.
- In the event that the battery leaks, avoid skin or eyes be contacted to these substances.
- Do not use a broken battery. Do not charge a broken or leaking battery.
- Do not charge the battery near or on the surface of flammable items. Ensure that there are people watching when charging the battery.
- If the battery is overheated when used, stop using it and do not attempt to charge it. Wait until it cools to room temperature.
若有收获，就点个赞吧
0 人点赞
