原文地址:https://blog.51cto.com/reid21/1717008

wKioL1ZWc6Tywlf_AAJW_dR6hsQ290.png

1.安装

安装以下依赖包:
yum install -y gcc gcc-c++ glibc make autoconf openssl openssl-devel lrzsz memcache
(可以先安装,操作时就只是检查)

下载以下软件包:
wget ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre/pcre-8.37.tar.gz #可用yum
wget http://nginx.org/download/nginx-1.9.6.tar.gz
wget http://keepalived.org/software/keepalived-1.2.19.tar.gz
wget http://cn2.php.net/get/php-5.6.15.tar.gz/from/this/mirror

2. 部署Haproxy

  1. [root@linux-node1haproxy]# vim /etc/salt/master
  2. file_roots:
  3. base:
  4. - /srv/salt/base
  5. prod:
  6. - /srv/salt/prod
  7. test:
  8. - /srv/salt/test

[root@linux-node1haproxy]# /etc/init.d/salt-master restart
###修改完配置文件要重启才能生效

  1. [root@linux-node1~]# mkdir /srv/salt/prod/pkg p ##生产上一些包放在这
  2. [root@linux-node1~]# mkdir /srv/salt/prod/haproxy
  3. [root@linux-node1~]# mkdir /srv/salt/prod/haproxy/files
  1. [root@linux-node1pkg]# vim pkg-init.sls ##安装包的初始化
  2. pkg-init: ##ID
  3. pkg.installed:
  4. - names:
  5. - gcc
  6. - gcc-c++
  7. - glibc
  8. - make
  9. - autoconf
  10. - openssl
  11. - openssl-devel
  12. - pcre-devel ###nginx需要
  13. [root@linux-node1prod]# cp /home/reid/tools/haproxy-1.6.2.tar.gz haproxy/files/p

操作方法:第一次先用手动安装一次,然后再用salt来写一次

  1. [root@linux-node1prod]# cp /home/reid/tools/haproxy-1.6.2.tar.gz haproxy/files/
  2. [root@linux-node1prod]# cd haproxy/files/
  3. [root@linux-node1files]# ls
  4. haproxy-1.6.2.tar.gz
  5. [root@linux-node1files]# cp haproxy-1.6.2.tar.gz /usr/local/src/
  6. [root@linux-node1files]# tar zxf haproxy-1.6.2.tar.gz
  7. [root@linux-node1files]# cd haproxy-1.6.2
  8. [root@linux-node1haproxy-1.6.2]# make TARGET=linux26 PREFIX=/usr/local/haproxy && makeinstall PREFIX=/usr/local/haproxy
  9. [root@linux-node1haproxy-1.6.2]# cd examples/
  10. [root@linux-node1examples]# vim haproxy.init
  11. BIN=/usr/local/haproxy/sbin/$BASENAME ##修改脚本路径


2.1 编写sls安装haproxy

[root@linux-node1examples]#cp haproxy.init /srv/salt/prod/haproxy/files/
[root@linux-node1examples]# cd /srv/salt/prod/haproxy/
[root@linux-node1haproxy]# vim install.sls

  1. include: ##先把包include
  2. - pkg.pkg-init
  3. haproxy-install:
  4. file.managed:
  5. - name: /usr/local/src/haproxy-1.6.2.tar.gz
  6. - source: salt://haproxy/files/haproxy-1.6.2.tar.gz ##放包根据file_roots来设
  7. - user: root
  8. - group: root
  9. - mode: 755
  10. cmd.run: ##安装
  11. - name: cd/usr/local/src && tar zxf haproxy-1.6.2.tar.gz &&cdhaproxy-1.6.2 && make TARGET=linux26 PREFIX=/usr/local/haproxy&&make install PREFIX=/usr/local/haproxy
  12. - unless: test -d /usr/local/haproxy ###如果不存在返回false时就执行
  13. - require:
  14. - pkg: pkg-init ##依赖于这些包
  15. - file: haproxy-install
  16. ##haproxy-install下有一个文件模块,依赖于这个,一个ID下一个模块只能使用一次
  17. haproxy-init: ##加入开机启动服务
  18. file.managed:
  19. -name: /etc/init.d/haproxy
  20. - source: salt://haproxy/files/haproxy.init
  21. - user: root
  22. - group: root
  23. - mode: 755
  24. - require:
  25. - cmd: haproxy-install ####haproxy-install下面一个cmd的模块,依赖于这个
  26. cmd.run:
  27. -name: chkconfig --add haproxy
  28. - unless: chkconfig --list |grep haproxy
  29. - require:
  30. - file: /etc/init.d/haproxy
  31. net.ipv4.ip_nonlocal_bind: #监听非本地IP ,负载均衡的机器上只有一个IP,所以要修改一个内核参数
  32. sysctl.present:
  33. - value: 1
  34. haproxy-config-dir: ###创建一个目录,放文件到里面
  35. file.directory:
  36. - name: /etc/haproxy
  37. - user: root
  38. - group: root
  39. - mode: 755

Note:监听非本地IP ,负载均衡的机器上只有一个IP,所以要修改一个内核参数

[root@linux-node1~]# cat /proc/sys/net/ipv4/ip_nonlocal_bind 
0

状态间关系:
unless:用于检查的命令仅当“unless”选项指向的命令返回false时才执行name指向的命令
require:我依赖某个状态,它执行了我才执行
[root@linux-node1haproxy]# salt 'linux-node1.*' state.sls haproxy.install env=prod

统一管理haproxy配置文件

[root@linux-node1~]# mkdir /srv/salt/prod/cluster  
[root@linux-node1~]# mkdir /srv/salt/prod/cluster/files ##把配置放里面
[root@linux-node1~]# cd /srv/salt/prod/cluster/files/

[root@linux-node1files]# vim haproxy-outside.cfg ##外网负载均衡

global
maxconn 100000
chroot /usr/local/haproxy
uid 99 
gid 99 
daemon
nbproc 1 
pidfile /usr/local/haproxy/logs/haproxy.pid
log 127.0.0.1 local3 info

defaults
option http-keep-alive
maxconn 100000
mode http
timeout connect 5000ms
timeout client  50000ms
timeout server 50000ms

listen stats
mode http
stats uri     /haproxy-status 
stats auth    haproxy:saltstack

frontend frontend_www_example_com
bind10.0.0.11:80
mode http
option httplog
log global
   default_backend backend_www_example_com

backend backend_www_example_com
option forwardfor header X-REAL-IP
option httpchk HEAD / HTTP/1.0
balanceroundrobin
server web-node1  10.0.0.7:8080 check inter 2000 rise 30 fall 15   
server web-node2  10.0.0.8:8080 check inter 2000 rise 30 fall 15

生产建议除了负载均衡都监听80,可以用普通用户来起
cluster目录下写haproxy相关的配置,配置文件的管理和服务的管理—》思路先安装—-配置—-再起

[root@linux-node1cluster]# vim haproxy-outside.sls
include:
  - haproxy.install

haproxy-service:
  file.managed:
    - name: /etc/haproxy/haproxy.cfg
    - source:salt://cluster/files/haproxy-outside.cfg
    - user: root
    - group: root
    - mode: 644
  service.running:     ##启动服务
    - name: haproxy
    - enable: True            ###开机自启动
    - reload: True     ###不加,配置文件变化了会restart
    - require:
      - cmd: haproxy-init
    - watch:           ##监控配置文件的变化
      - file: haproxy-service
[root@linux-node1cluster]# vim /srv/salt/base/top.sls
base:
  '*':
    - init.env_init

prod:
  'linux-node1.example.com':
    - cluster.haproxy-outside
  'linux-node2.example.com':
    - cluster.haproxy-outside

[root@linux-node1~]# salt ‘*’ state.highstate


添加首页测试:
Apache的监听端口要修改
Listen:8080

/etc/init.d/httpd restart    ###linux-node2上没有安装
[root@linux-node1~]# echo "linux-node1" >>/var/www/html/index.html
[root@linux-node2~]# echo "linux-node2" >>/var/www/html/index.html
http://10.0.0.7:8888/haproxy-status
bind 0.0.0.0:8888
stats enable

3. 部署keepalived

准备启动脚本:

[root@linux-node1etc]# mkdir /srv/salt/prod/keepalived/files -p
[root@linux-node1etc]# cp /usr/local/src/keepalived-1.2.19/keepalived/etc/init.d/keepalived.init/srv/salt/prod/keepalived/files/
[root@linux-node1etc]# cp /usr/local/src/keepalived-1.2.19/keepalived/etc/keepalived/keepalived.conf  /srv/salt/prod/keepalived/files/
[root@linux-node1etc]# cd /srv/salt/prod/keepalived/files/
[root@linux-node1files]# ls
keepalived.conf  keepalived.init
[root@linux-node1files]# vimkeepalived.init   ###启动脚本 
start(){
    echo -n $"Starting $prog: "
    daemon /usr/local/keepalived/sbin/keepalived${KEEPALIVED_OPTIONS}

3.1 编写keepalived的sls

[root@linux-node1files]# cd ..
[root@linux-node1keepalived]# vim install.sls   ##安装

**

include:            ##先include要安装的基础包
  - pkg.pkg-init

keepalived-install:      ##安装
  file.managed:
    - name:/usr/local/src/keepalived-1.2.19.tar.gz
    - source:salt://keepalived/files/keepalived-1.2.19.tar.gz   ###存放安装包
    - user: root
    - group: root
    - mode: 755
  cmd.run:            ###编译
    - name: cd/usr/local/src && tar zxf keepalived-1.2.19.tar.gz && cdkeepalived-1.2.19  && ./config
ure --prefix=/usr/local/keepalived --disable-fwmark&& make && make install
- unless: test -d /usr/local/keepalived
    - require:
      - pkg: pkg-init
      - file:keepalived-install
keepalived-init:          ###以下是管理配置文件
  file.managed:
    - name:/etc/init.d/keepalived
    - source:salt://keepalived/files/keepalived.init
    - user: root
    - group: root
    - mode: 755
  cmd.run:                 ###设置开机启动
    - name: chkconfig--add keepalived
    - unless:chkconfig --list | grep keepalived
    - require:
      - file:keepalived-init

/etc/sysconfig/keepalived:
  file.managed:
    - source:salt://keepalived/files/keepalived.sysconfig
    - user: root
    - group: root
    - mode: 644

/etc/keepalived:
  file.directory:
    - user: root
    - group: root
    - mode: 755

准备Keepalived配置文件

[root@linux-node1sysconfig]# cp /usr/local/keepalived/etc/sysconfig/keepalived/srv/salt/prod/keepalived/files/keepalived.sysconfig
[root@linux-node1sysconfig]# vim keepalived  ====》KEEPALIVED_OPTIONS="-D"
[root@linux-node1keepalived]# ll files/
总用量 12
-rw-r--r--1 root root 3562 11月 21 13:33 keepalived.conf
-rwxr-xr-x1 root root 1335 11月 21 13:39 keepalived.init
-rw-r--r--1 root root  667 11月 21 13:59 keepalived.sysconfig
-rw-r--r--1 root root 330164 11月 21 14:26 keepalived-1.2.19.tar.gz
[root@linux-node1keepalived]# salt '*' state.sls keepalived.install env=prod

keepalived的引用
[root@linux-node1~]# cd /srv/salt/prod/cluster/files/
[root@linux-node1files]# cat haproxy-outside-keepalived.conf ###keepalived的配置文件
**

!Configuration File for keepalived
global_defs{
   notification_email {
     saltstack@example.com
   }
   notification_email_fromkeepalived@example.com
   smtp_server 127.0.0.1
   smtp_connect_timeout 30
   router_id `ROUTEID`
}

vrrp_instancehaproxy_ha {
state `STATEID`
interfaceeth0
    virtual_router_id 36
priority `PRIORITYID`
    advert_int 1
authentication{
auth_typePASS
        auth_pass 1111
    }
    virtual_ipaddress {
       10.0.0.11
    }
}

[root@linux-node1cluster]# ls
files haproxy-outside.sls
[root@linux-node1cluster]# vim haproxy-outside-keepalived.sls

include:
  - keepalived.install

keepalived-service:
  file.managed:
    - name: /etc/keepalived/keepalived.conf
    - source:salt://cluster/files/haproxy-outside-keepalived.conf
    - user: root
    - group: root
    - mode: 644
    - template: jinja
   {% if grains['fqdn'] == 'linux-node1.example.com' %}
    - ROUTEID:haproxy_ha
    - STATEID: MASTER
    - PRIORITYID: 150
    {% elifgrains['fqdn'] == 'linux-node2.example.com' %}
    - ROUTEID:haproxy_ha
    - STATEID: BACKUP
    - PRIORITYID: 100
    {% endif %}
  service.running:
    - name: keepalived
    - enable: True
    - watch:
      - file: keepalived-service

[root@linux-node1cluster]# salt ‘‘ state.sls cluster.haproxy-outside-keepalived env=prodtest=True
[root@linux-node1cluster]# salt ‘
‘ state.sls cluster.haproxy-outside-keepalived env=prod

[root@linux-node1salt]# vim base/top.sls 
base:
  '*':
    - init.env_init

prod:
  'linux-node1.example.com':
    - cluster.haproxy-outside
    - cluster.haproxy-outside-keepalived
  'linux-node2.example.com':
    - cluster.haproxy-outside
    - cluster.haproxy-outside-keepalived

[root@linux-node1prod]#salt '*' state.highstate
[root@linux-node1prod]# ip add| grep 11
inet 10.0.0.11/32 scope global eth0

[root@linux-node1prod]#/etc/init.d/keepalived stop
[root@linux-node2~]# ip add |grep 11
inet 10.0.0.11/32 scope global eth0


4. 统一用户www管理

[root@linux-node1~]# mkdir /srv/salt/prod/user
[root@linux-node1user]# vim www.sls ##web的管理用户

www-user-group:
  group.present:
    - name: www
    - gid: 1000

  user.present:
    - name: www
    - fullname: www
    - shell: /sbin/nologin
    - uid: 1000
- gid: 1000

[root@linux-node1user]# salt ‘‘ state.sls user.www env=prod test=True
[root@linux-node1user]# salt ‘
‘ state.sls user.www env=prod

[root@linux-node1user]#vim mysql.sls ###mysql管理用户

mysql-user-group:
  group.present:
    - name: mysql
    - gid: 501

  user.present:
    - name: mysql
    - fullname: mysql
    - shell: /sbin/nologin
    - uid: 501
- gid: 501

[root@linux-node1user]# salt ‘‘ state.sls user.mysql env=prod test=True
[root@linux-node1user]# salt ‘
‘ state.sls user.mysql env=prod

5. 部署Nginx

[root@linux-node1~]# tree /srv/salt/prod/nginx/
/srv/salt/prod/nginx/
├── files
│ ├── nginx-1.9.6.tar.gz
│ └── nginx.init ###启动脚本
└── install.sls
[root@linux-node1~]# tree /srv/salt/prod/cluster/
/srv/salt/prod/cluster/
├── files
│ ├── haproxy-outside.cfg
│ ├──haproxy-outside-keepalived.conf
│ └── nginx-web.conf ##配置文件
├── haproxy-outside-keepalived.sls
├── haproxy-outside.sls
└── nginx-web.sls ###管理配置文件

[root@linux-node1~]#cat /srv/salt/prod/nginx/install.sls

include:
  - pkg.pkg-init

nginx-install:
  file.managed:
    - name: /usr/local/src/nginx-1.9.6.tar.gz
    - source:salt://nginx/files/nginx-1.9.6.tar.gz
    - user: root
    - group: root
    - mode: 755
  cmd.run:
    - name: cd/usr/local/src && tar zxf nginx-1.9.6.tar.gz && cd nginx-1.9.6&&./configure --prefix=/usr/local/nginx --user=www --group=www--with-http_ssl_module --with-http_stub_status_module && make&& make install
    - unless: test -d/usr/local/nginx
    - pkg: pkg-init
    - file:nginx-install

nginx-init:
  file.managed:
    - name:/etc/init.d/nginx
    - source:salt://nginx/files/nginx.init
    - user: root
    - group: root
    - mode: 755
    - require:
      - cmd:nginx-install
  cmd.run:
    - name: chkconfig--add nginx
    - unless:chkconfig --list | grep nginx
    - require:
      - file:/etc/init.d/nginx

[root@linux-node1~]# cat /srv/salt/prod/cluster/nginx-web.sls

include:
  - nginx.install

nginx-service:
  file.managed:
    - name:/usr/local/nginx/conf/nginx.conf
    - source:salt://cluster/files/nginx-web.conf

  service.running:
    - name: nginx
    - enable: True
    - reload: True
    - require:
      - cmd:nginx-init
    - watch:
      - file:nginx-service

[root@linux-node1~]# cat /srv/salt/base/top.sls


base:
  '*':
    - init.env_init

prod:
  'linux-node1.example.com':
    - cluster.haproxy-outside
    - cluster.haproxy-outside-keepalived
    -cluster.nginx-web
  'linux-node2.example.com':
    - cluster.haproxy-outside
    - cluster.haproxy-outside-keepalived
    -cluster.nginx-web

2. saltstack------LANM架构搭建练习 - 图2

6. 部署PHP

[root@linux-node1~]# tree /srv/salt/prod/php/
/srv/salt/prod/php/
├── files
│ ├── php-5.6.15.tar.gz
│ ├── php-fpm.conf ###修改下启动用户为www
│ └── php.init
└── install.sls

[root@linux-node1~]# tree /srv/salt/prod/cluster/
/srv/salt/prod/cluster/
├── files
│ ├── haproxy-outside.cfg
│ ├──haproxy-outside-keepalived.conf
│ ├── nginx-web.conf
│ └── php.ini
├── haproxy-outside-keepalived.sls
├── haproxy-outside.sls
├── nginx-web.sls
└── php-web.sls

[root@linux-node1~]# cat /srv/salt/prod/php/install.sls

include:
  - pkg.pkg-init

php-install:
  file.managed:
    - name:/usr/local/src/php-5.6.15.tar.gz
    - source:salt://php/files/php-5.6.15.tar.gz
    - user: root
    - group: root
    - mode: 755
  cmd.run:
    - name: cd/usr/local/src/ && tar xf php-5.6.15.tar.gz && cd php-5.6.15&& ./configure --prefix=/usr/local/php --with-mysql --with-jpeg-dir--with-png-dir --with-zlib --enable-xml --with-libxml-dir --with-curl--enable-bcmath --enable-shmop --enable-sysvsem --enable-inline-optimization --enable-mbregex--with-openssl --enable-mbstring --with-gd --enable-gd-native-ttf--enable-sockets --with-xmlrpc --enable-zip --enable-soap --disable-debug--enable-opcache --enable-zip --with-config-file-path=/usr/local/php/etc--enable-fpm --with-fpm-user=nginx --with-fpm-group=nginx && make&& make install
    - unless: test -d/usr/local/php
    - pkg: pkg-init
    - file:php-install

php-conf:
  file.managed:
    - name:/usr/local/php/etc/php-fpm.conf  
    - source:salt://php/files/php-fpm.conf   ###启动需要的文件
    - user: root
    - group: root
    - mode: 644
    - require:
      - cmd:php-install

php-init:
  file.managed:
    - name:/etc/init.d/php
    - source:salt://php/files/php.init    ###启动脚本
    - user: root
    - group: root
    - mode: 755
    - require:
      - cmd:php-install

  cmd.run:
    - name: chkconfig--add php
    - unless:chkconfig --list | grep php
    - require:
      - file:/etc/init.d/php

[root@linux-node1~]# cat /srv/salt/prod/cluster/php-web.sls

include:
  - php.install

php-service:
  file.managed:
    - name:/usr/local/php/etc/php.ini            ###配置文件
    - source:salt://cluster/files/php.ini

  service.running:
    - name: php
    - enable: True
    - reload: True
    - require:
      - cmd: php-init
    - watch:
      - file:php-service

[root@linux-node1~]# cat /srv/salt/prod/cluster/files/nginx-web.conf ###需要修改,前期部署可以一下实现,可以根据不同的站点对业务配置管理

worker_processes  1;
events{
    worker_connections  1024;
}
http{
    include       mime.types;
    default_type  application/octet-stream;
    sendfile        on;
    keepalive_timeout  65;
    server {
        listen       8081;
        server_name  www.reid.org;
        root   html/blog;
        index index.php index.html index.htm;
    location ~ .*\.(php|php5)?$     ###支持PHP
    {
     fastcgi_pass  127.0.0.1:9000;
     fastcgi_index index.php;
     include fastcgi.conf;
    }

        error_page   500 502 503 504  /50x.html;
        location = /50x.html {
            root   html;
        }
    }
}

salt’‘ state.sls php.install env=prod test=True
salt’
‘ state.sls php.install env=prod
salt’‘ state.higtstate
测试:
*
2. saltstack------LANM架构搭建练习 - 图3



**

7.部署Memcached

[root@linux-node1~]#tree /srv/salt/prod/memcached/
/srv/salt/prod/memcached/
├── files
│ └── memcached-1.4.13.tar.gz
├── install.sls
├── memcached.sls
└── service.sls

[root@linux-node1~]# mkdir /srv/salt/prod/libevent/files -p
[root@linux-node1~]# mkdir /srv/salt/prod/memcached/files –p

安装libevent
[root@linux-node1~]# vim /srv/salt/prod/libevent/install.sls

libevent-source-install:
  file.managed:
    - name:/usr/local/src/libevent-1.4.13-stable.tar.gz
    - source:salt://libevent/files/libevent-1.4.13-stable.tar.gz
    - user: root
    - group: root
    - mode: 644

  cmd.run:
    - name: cd /usr/local/src && tarzxf libevent-1.4.13-stable.tar.gz && cd libevent-1.4.13-stable&& ./config
ure--prefix=/usr/local/libevent && make && make install
    - unless: test -d /usr/local/libevent
    - require:
      - file: libevent-source-install



安装memcached
[root@linux-node1~]# vim /srv/salt/prod/memcached/install.sls

include:
  - libevent.install

memcached-source-install:
  file.managed:
    - name: /usr/local/src/memcached-1.4.13.tar.gz
    - source:salt://memcached/files/memcached-1.4.13.tar.gz
    - user: root
    - group: root
    - mode: 644
  cmd.run:
    - name: cd /usr/local/src && tarzxf memcached-1.4.13.tar.gz && cd memcached-1.4.13 &&./configure --prefix
=/usr/local/memcached--enable-64bit --with-libevent=/usr/local/libevent && make &&make install
    - unless: test -d /usr/local/memcached
    - require:
      - cmd: libevent-source-install
      - file: memcached-source-install

启动memcached
[root@linux-node1~]# vim /srv/salt/prod/memcached/service.sls

include:
  - memcached.install
  - user.www

memcached.service:
  cmd.run:
    - name: /usr/local/memcached/bin/memcached-d -m 128 -p 11211 -c 8096 -u www
    - unless: netstat -tnlp|grep 11211
    - require:
      - cmd: memcached-source-install
      - user: www-user-group

在top file上定义
[root@linux-node1~]# vim /srv/salt/base/top.sls

base:
  '*':
    - init.env_init

prod:
  'linux-node1.example.com':
    - cluster.haproxy-outside
    - cluster.haproxy-outside-keepalived
    - cluster.nginx-web
    - cluster.php-web
    - cluster.mysql
    - memcached.service
  'linux-node2.example.com':
    - cluster.haproxy-outside
    - cluster.haproxy-outside-keepalived
    - cluster.nginx-web
    - cluster.php-web
    - cluster.mysql
    - memcached.service

[root@linux-node1~]# netstat -ntlp|grep 11211
tcp 0 0 0.0.0.0:11211 0.0.0.0: LISTEN 9485/memcached
tcp 0 0 :::11211 :::
LISTEN 9485/memcached [root@linux-node2~]# netstat -ntlp|grep 11211 tcp 0 0 0.0.0.0:11211 0.0.0.0: LISTEN 5137/memcached
tcp 0 0 :::11211 :::
LISTEN 5137/memcached

PHP Memcache
[root@linux-node1~]# vim /srv/salt/prod/php/php-memcache.sls


memcache-plugin:
  file.managed:
    - name: /usr/local/src/memcache-2.2.5.tgz
    - source: salt://php/files/memcache-2.2.5.tgz
    - user: root
    - group: root
    - mode: 755
  cmd.run:
    - name: cd /usr/local/src && tarzxf memcache-2.2.5.tgz && cd memcache-2.2.5 &&/usr/local/php/bin/phpize &
&./configure --enable-memcache --with-php-config=/usr/local/php/bin/php-config&& make && make install
    - unless: test -f/usr/local/php/lib/php/extensions/*/memcache.so
    - require:
      - file: memcache-plugin

/usr/local/php/etc/php.ini:
  file.append:
    - text:
      - extension=memcache.so

2. saltstack------LANM架构搭建练习 - 图4


8. 部署MySQL(生产上不建议主从用salt部署)

[root@linux-node1~]# tree /srv/salt/prod/mysql/
/srv/salt/prod/mysql/
├── files
│ ├── my-medium.cnf ##配置文件
│ ├── mysql-5.1.72.tar.gz ##安装包
│ └── mysql.server ###启动脚本
└── install.sls ###安装文件

[root@linux-node1~]# cat /srv/salt/prod/mysql/install.sls


include:
  - pkg.pkg-init
  - user.mysql

mysql-install:
  file.managed:
    - name: /usr/local/src/mysql-5.1.72.tar.gz
    - source:salt://mysql/files/mysql-5.1.72.tar.gz
    - user: root
    - group: root
    - mode: 755
  cmd.run:
    - name: cd /usr/local/src && tar xfmysql-5.1.72.tar.gz && cd mysql-5.1.72 && ./configure--prefix=/usr/local/mysql--with-unix-socket-path=/usr/local/mysql/tmp/mysql.sock --localstatedir=/usr/local/mysql/data--enable-assembler --enable-thread-safe-client --with-mysqld-user=mysql--with-big-tables --without-debug --with-pthread --enable-assembler--with-extra-charsets=complex --with-readline --with-ssl --with-embedded-server--enable-local-infile --with-plugins=partition,innobase--with-mysqld-ldflags=-all-static --with-client-ldflags=-all-static &&make && make install
    - unless: test -d /usr/local/mysql
    - require:
      - file: mysql-install
      - pkg: pkg-init


mysql-data-dir:
  file.directory:
    - name: /usr/local/mysql/data
    - user: mysql
    - group: mysql
    - require:
      - user: mysql
  cmd.run:
    - name: cd /usr/local/mysql/bin/ &&./mysql_install_db --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data/--user=mysql
    - require:
      - cmd: mysql-install

mysql-config-file:
  file.managed:
    - name: /etc/my.cnf
    - source: salt://mysql/files/my-medium.cnf
    - user: root
    - group: root
    - mode: 644

mysql-init:
  file.managed:
    - name: /etc/init.d/mysqld
    - source: salt://mysql/files/mysql.server
    - user: root
    - group: root
    - mode: 755
    - require:
      - cmd: mysql-install
      - file: mysql-config-file
  cmd.run:
    - name: chkconfig --add mysqld
    - unless: chkconfig --list | grep mysqld
    - require:
      - file: /etc/init.d/mysqld
  service.running:
    - name: mysqld
    - enable: True
    - require:
      - file: /etc/init.d/mysqld