为什么声床（Bed）的音频信号出现在了渲染器的第65路输入
您的输入或输出、或是两者都可能接入了错误的MADI卡。检查是否接错最简单的方法是，在RMU输入第11路挂一个信号发生器，且发生器后面经全景声声像调节器。信号应在RMU网页界面中起表。提升RMU中RME混音台的音量，可以进一步确认该通道。如果在默认7.1.4房间设定中，如果将信号声像调节至Z轴即头顶位置，但声音却从地面的声道出来，那么输出可能错误地接入了2号MADI卡，而不是用于监听的1号MADI卡
Why is “Bed” audio showing up on Renderer input 65?
You likely have the inputs, outputs, or both connected to the wrong MADI card. The easiest way to verify these are connected properly is to insert a signal generator and buss to RMU Input 11 with the Atmos Panner inserted below the signal generator. The signal should meter on the RMU Web UI meters. This can be further verified by bringing up the RME mixer on the RMU itself. If panning the signal to the Z-axis with the default 7.1.4 room results in audio in the floor channels, the output is likely connected to the 2nd MADI card instead of the 1st MADI card which is used for monitoring.
若有收获，就点个赞吧
0 人点赞
