原文链接

为什么左右声道的监听输出小了10dB？

RME声卡驱动4.22版配套的TotalMix软件安装后，默认将输出1和2设为主输出并做了10的衰减。为解决此问题，先从任务栏打开TotalMix软件（在任务栏右下角显示隐藏的图标）。在程序界面的右下角单击Assign（分配）键，在主输出推子右边，将Main Out设为None（无）。输出1/2将出现在底部硬件输出一排的左侧，双击该推子的数值，在弹出的对话框里输入0。请确保在选中硬件输出那排时，第二排中间软件播放栏的输出1/2电平也设在0。否则双击推子数值，将该数也设为0。

在第二台MADI卡中也要进行相同的操作。您可以用右上角的选项在两台MADI间切换。

另外，为了防止再次出现该问题，您可以到Option/Settings（设置）界面将Main Out Recall value（主输出重置值）设为0.0dB。

在TotalMix菜单栏file/save snapshot（文件/保存 快照）往桌面保存一个Snapshot，这样就可以在程序设置被更改后恢复回设好的状态。

Why are Left and Right monitor outputs down 10dB?

Additionally you can protect against a reccurence by going to Option/Settings and adjusting the Main Out Recall value to 0.0dB.

With RME drivers v4.22 the RME TotalMix application is installed with outputs 1 and 2 assigned to Main Output at -10. To fix this launch the Total Mix application from the taskbar (show hidden icons on lower right). At the bottom right of the application click the Assign button to the right of the Main Output fader and set the Main Out to None. Outputs 1/2 will appear in the left side of the bottom Hardware Output row. Double click on the fader numeric value to bring up the dialog box and set to 0. Make sure that the Outputs 1/2 on the 2nd middle labelled Software Playback is also set to 0 when 1/2 is selected on the Hardware Playback bottom row. If not double click on the fader numeric value to bring up the dialog box and set to 0.

This needs to be done on the 2nd MADI card as well. You can switch between MADI 1 and 2 in the top right drop down.

In the Total Mix menu bar file/save snapshot to save a snapshot to the desktop that can be used to restore the application in case it is ever changed.