QTextLine Class Reference
[QtGui module]
在QTextLine类表示一个文本行内QTextLayout。More…
Types
enum CursorPosition { CursorBetweenCharacters, CursorOnCharacter }
enum Edge { Leading, Trailing }
Methods
__init__ (self)
__init__ (self, QTextLine)
float ascent (self)
(float, int cursorPos) cursorToX (self, int cursorPos, Edge edge = QTextLine.Leading)
float descent (self)
draw (self, QPainter painter, QPointF position, QTextLayout.FormatRange selection = None)
float height (self)
float horizontalAdvance (self)
bool isValid (self)
float leading (self)
bool leadingIncluded (self)
int lineNumber (self)
QRectF naturalTextRect (self)
float naturalTextWidth (self)
QPointF position (self)
QRectF rect (self)
setLeadingIncluded (self, bool included)
setLineWidth (self, float width)
setNumColumns (self, int columns)
setNumColumns (self, int columns, float alignmentWidth)
setPosition (self, QPointF pos)
int textLength (self)
int textStart (self)
float width (self)
float x (self)
int xToCursor (self, float x, CursorPosition edge = QTextLine.CursorBetweenCharacters)
float y (self)
Detailed Description
在QTextLine类表示一个文本行内QTextLayout。
一个文本行通常是由创建QTextLayout.createLine( ) 。
创建后,该行可使用的填充setLineWidth()或setNumColumns()函数。 A线都有一些属性,包括其佔用的矩形,rect() ,其坐标,x()和y() ,其textLength( )width()和naturalTextWidth() ,和其ascent( )和体面()相对于文本。光标在该行的条款的位置是可从cursorToX()和从它的逆xToCursor( ) 。 A线可以与移动setPosition( ) 。
Type Documentation
QTextLine.CursorPosition
Constant | Value |
---|---|
QTextLine.CursorBetweenCharacters |
0 |
QTextLine.CursorOnCharacter |
1 |
QTextLine.Edge
Constant | Value |
---|---|
QTextLine.Leading |
0 |
QTextLine.Trailing |
1 |
Method Documentation
QTextLine.__init__ (self)
创建一个无效的行。
QTextLine.__init__ (self, QTextLine)
float QTextLine.ascent (self)
返回该行的崛起。
See also descent()和height( ) 。
(float, int cursorPos) QTextLine.cursorToX (self, int cursorPos, Edge edge = QTextLine.Leading)
光标位置转换cursorPos到的对应的行内x位置,同时考虑edge。
If cursorPos是不是一个有效的光标位置,最接近的有效光标位置将被替代使用,并CPOS将被修改为指向这个有效的光标位置。
See also xToCursor( ) 。
float QTextLine.descent (self)
返回该行的后裔。
QTextLine.draw (self, QPainter painter, QPointF position, QTextLayout.FormatRange selection = None)
绘制行中给定的painter在指定的position。该selection供内部使用保留的。
float QTextLine.height (self)
返回该行的高度。这等于ascent()+descent( ) + 1 ,如果是不包括在内的领先。如果领导包括在内,这等于ascent()+descent()+leading()+ 1 。
See also ascent( )descent( )leading()和setLeadingIncluded( ) 。
float QTextLine.horizontalAdvance (self)
返回文本的水平前进。文本的进步是从它的位置到下一个位置,在该文本自然会得出的距离。
通过将前进到文本行的位置,并使用这个作为第二文本行的位置,你就可以无需在两者之间的间隙来定位两行并排侧。
此功能被引入Qt的4.7 。
bool QTextLine.isValid (self)
返回True如果该文本行是有效的,否则返回False 。
float QTextLine.leading (self)
返回该行的领导。
此功能被引入Qt的4.6 。
See also ascent( )descent()和height( ) 。
bool QTextLine.leadingIncluded (self)
返回True如果积极主导,计入该行的高度,否则返回False 。
默认情况下,是不包括在内的领先。
此功能被引入Qt的4.6 。
See also setLeadingIncluded( ) 。
int QTextLine.lineNumber (self)
返回文本引擎的线的位置。
QRectF QTextLine.naturalTextRect (self)
[
返回复盖的线的矩形。
float QTextLine.naturalTextWidth (self)
]($docs-qrectf.html)
返回由文本所佔据的线的宽度。这始终是\u003c =到width( ) ,并且是可以在不改变换行位置使用的布局( )的最小宽度。
QPointF QTextLine.position (self)
[
返回该行的位置相对于文本布局的地位。
]($docs-qpointf.html)
See also setPosition( ) 。
QRectF QTextLine.rect (self)
[
返回该行的边界矩形。
]($docs-qrectf.html)
See also x( )y( )textLength()和width( ) 。
QTextLine.setLeadingIncluded (self, bool included)
包括积极主导入行的高度,如果included为True,否则不包括领先。
默认情况下,是不包括在内的领先。
需要注意的是负领先被忽略,它必须在代码中使用的文本行通过让线重叠处理。
此功能被引入Qt的4.6 。
See also leadingIncluded( ) 。
QTextLine.setLineWidth (self, float width)
勾画出具有给定的线width。该生产线是从起始位置充满了尽可能多的字符将适合入行。在壳体的文本不能被分割在该行的末尾,将被填充有附加字符到下一个空白字符或文本的末尾。
QTextLine.setNumColumns (self, int columns)
勾画出的线条。该生产线是从它的起始位置充满了尽可能多的字符被指定numColumns。若文本不能被分割,直到numColumns字符,该行就会充满尽可能多的字符到下一个空格或文字的结尾。
QTextLine.setNumColumns (self, int columns, float alignmentWidth)
勾画出的线条。该生产线是从它的起始位置充满了尽可能多的字符被指定numColumns。若文本不能被分割,直到numColumns字符,该行就会充满尽可能多的字符到下一个空格或文字的结尾。提供alignmentWidth被用作基准宽度对齐。
QTextLine.setPosition (self, QPointF pos)
移动线位置pos。
See also position( ) 。
int QTextLine.textLength (self)
返回该行的文本的长度。
See also naturalTextWidth( ) 。
int QTextLine.textStart (self)
返回该行的开始从传递到该字符串的开头QTextLayout。
float QTextLine.width (self)
返回所指定的布局( )函数线的宽度。
See also naturalTextWidth( )x( )y( )textLength()和rect( ) 。
float QTextLine.x (self)
返回该行的x位置。
See also rect( )y( )textLength()和width( ) 。
int QTextLine.xToCursor (self, float x, CursorPosition edge = QTextLine.CursorBetweenCharacters)
转换的x坐标x到最近匹配的光标位置,根据光标位置类型,cpos。
See also cursorToX( ) 。
float QTextLine.y (self)
返回该行的y位置。
See also x( )rect( )textLength()和width( ) 。