I Laserbox maintanance videos:

001_How to clean the air nozzle and laser head

002_How to maintain the guide rails

003_How to clean the lenses

004_How to clean the tray

005_Painting liquid lubrication

006_How to change the cooling liquid

007_Assembling and disassembling the laser tube

008_Assembling the laser tube and add the cooling liquid

009_How to replace the camera

010_Assembling and disassembling the mainboard for Laserbox

011_Assembling and disassembling the Y1 board

012_Assembly and disassembly DC Power

013_Assembly and disassembly the Laser Power

014_Replacing the z axis adater cable between z axis adapter board and mainboard

015_Replacing the infrared conjoined seat on laserbox

016_Replacing the z axis guide on Laser head

017_How to insert the SD card in Laserbox

018_How to place the steel plate and big white paper to laserbox properly before doing first calibration

019_First calibration

020_Second Calibration （second calibration is not required once the first calibration has done succecssfully）

021_Tray installation on Laserbox

022_Replacing the controlling board or motor of the smoke purifier

023_How to adjust the x axis belt of laserbox machine

024_How to replace the z axis motor

II Wiring diagrams for the boards of laserbox machine

Mainboard Diagram

image.png

Y1 Board Diagram

image.png

Z axis adapter board

image.png

Circle LED button controling Board

image.png
image.png

Camera inside images

image.png

Aviation connector

image.png

Laser Power

【Note: please do not touch the metal case of laser power when the machine is powered on to ensure safty!!!】
image.png
[Note: Normally, there is no need to touch this switch since it has been switched to the correct power according to the local power in your country.]
image.png

III Overview of laserbox internal structure

1. Left side of the laserbox machine

image.png

2. Right side of the laserbox machine

image.png

3. Lenses

Focus lense:
image.png image.png
Reflective lense:
image.png image.png