Connect CamFi

  • Show currently connected CamFi. If there are multiple CamFi devices in the current local area network, you can enter to switch CamFi devices

    Connection mode

  • You can change the connection mode of CamFi. The type is hotspot mode or bridge mode.

    Access password

  • Set the access password of CamFi.

    Network Settings

  • You can set the Wi-Fi name, Wi-Fi password and channel of the wireless network of CamFi. You can also set the wired network of CamFi.

    Confirm image

  • After you enable it, and then take photos the photos taken are automatically displayed for viewing.

    Automatic download（Sony Fuji）

  • For Sony and Fujifilm camera, after it is turned on, it can automatically download the photos taken to the mobile phone.

    Automatic backup to SD card

  • The captured photos will be automatically backed up to the SD card in the CamFi3.

    Only save JPG to SD card

  • Only the JPG are automatically backed up to the SD card in CamFi3.

    Transmission settings

  • Set the format for transferring the photos on the camera to the mobile phone. You can set whether to directly transfer to the mobile phone album. You can set whether to transfer the compressed image or the original image. You can set remote transmission to Dropbox or FTP.

    Camera information

  • Check the camera model, Lens, serial number, and memory card type.

    Print settings

  • Set the network address.

    Third-party online shooting Service

  • After starting, the camera can be remotely controlled by the original software of the camera. You cannot use the CamFi software after enabling it. (CamFi Professional Edition must be purchased and upgraded to all-round edition before use)

    Clear Cache

  • Clear the photo cache of the CamFi APP.

    Firmware Update

  • Upgrade the CamFi firmware.

    About

  • You can perform a speed test. Check the current software version, firmware version, and information about our company.