View source Improve this doc

$compile

service in module ng

Description

Compiles a piece of HTML string or DOM into a template and produces a template function, which can then be used to link scope and the template together.

The compilation is a process of walking the DOM tree and matching DOM elements to directives.

Note: This document is an in-depth reference of all directive options. For a gentle introduction to directives with examples of common use cases, see the directive guide.

Comprehensive Directive API

There are many different options for a directive.

The difference resides in the return value of the factory function. You can either return a "Directive Definition Object" (see below) that defines the directive properties, or just the postLink function (all other properties will have the default values).

Best Practice: It's recommended to use the "directive definition object" form.

Here's an example directive declared with a Directive Definition Object:

  var myModule = angular.module(...);
 
  myModule.directive('directiveName', function factory(injectables) {
    var directiveDefinitionObject = {
      priority: 0,
      template: '<div></div>', // or // function(tElement, tAttrs) { ... },
      // or
      // templateUrl: 'directive.html', // or // function(tElement, tAttrs) { ... },
      replace: false,
      transclude: false,
      restrict: 'A',
      scope: false,
      controller: function($scope, $element, $attrs, $transclude, otherInjectables) { ... },
      require: 'siblingDirectiveName', // or // ['^parentDirectiveName', '?optionalDirectiveName', '?^optionalParent'],
      compile: function compile(tElement, tAttrs, transclude) {
        return {
          pre: function preLink(scope, iElement, iAttrs, controller) { ... },
          post: function postLink(scope, iElement, iAttrs, controller) { ... }
        }
        // or
        // return function postLink( ... ) { ... }
      },
      // or
      // link: {
      //  pre: function preLink(scope, iElement, iAttrs, controller) { ... },
      //  post: function postLink(scope, iElement, iAttrs, controller) { ... }
      // }
      // or
      // link: function postLink( ... ) { ... }
    };
    return directiveDefinitionObject;
  });

Note: Any unspecified options will use the default value. You can see the default values below.

Therefore the above can be simplified as:

  var myModule = angular.module(...);
 
  myModule.directive('directiveName', function factory(injectables) {
    var directiveDefinitionObject = {
      link: function postLink(scope, iElement, iAttrs) { ... }
    };
    return directiveDefinitionObject;
    // or
    // return function postLink(scope, iElement, iAttrs) { ... }
  });

Directive Definition Object

The directive definition object provides instructions to the compiler. The attributes are:

priority

When there are multiple directives defined on a single DOM element, sometimes it is necessary to specify the order in which the directives are applied. The priority is used to sort the directives before their compile functions get called. Priority is defined as a number. Directives with greater numerical priority are compiled first. Pre-link functions are also run in priority order, but post-link functions are run in reverse order. The order of directives with the same priority is undefined. The default priority is 0.

terminal

If set to true then the current priority will be the last set of directives which will execute (any directives at the current priority will still execute as the order of execution on same priority is undefined).

scope

If set to true, then a new scope will be created for this directive. If multiple directives on the same element request a new scope, only one new scope is created. The new scope rule does not apply for the root of the template since the root of the template always gets a new scope.

If set to {} (object hash), then a new "isolate" scope is created. The 'isolate' scope differs from normal scope in that it does not prototypically inherit from the parent scope. This is useful when creating reusable components, which should not accidentally read or modify data in the parent scope.

The 'isolate' scope takes an object hash which defines a set of local scope properties derived from the parent scope. These local properties are useful for aliasing values for templates. Locals definition is a hash of local scope property to its source:

• @ or @attr - bind a local scope property to the value of DOM attribute. The result is always a string since DOM attributes are strings. If no attr name is specified then the attribute name is assumed to be the same as the local name. Given and widget definition of scope: { localName:'@myAttr' }, then widget scope property localName will reflect the interpolated value of hello {{name}}. As the name attribute changes so will the localName property on the widget scope. The name is read from the parent scope (not component scope).

• = or =attr - set up bi-directional binding between a local scope property and the parent scope property of name defined via the value of the attr attribute. If no attr name is specified then the attribute name is assumed to be the same as the local name. Given and widget definition of scope: { localModel:'=myAttr' }, then widget scope property localModel will reflect the value of parentModel on the parent scope. Any changes to parentModel will be reflected in localModel and any changes in localModel will reflect in parentModel. If the parent scope property doesn't exist, it will throw a NON_ASSIGNABLE_MODEL_EXPRESSION exception. You can avoid this behavior using =? or =?attr in order to flag the property as optional.

• & or &attr - provides a way to execute an expression in the context of the parent scope. If no attr name is specified then the attribute name is assumed to be the same as the local name. Given and widget definition of scope: { localFn:'&myAttr' }, then isolate scope property localFn will point to a function wrapper for the count = count + value expression. Often it's desirable to pass data from the isolated scope via an expression and to the parent scope, this can be done by passing a map of local variable names and values into the expression wrapper fn. For example, if the expression is increment(amount) then we can specify the amount value by calling the localFn as localFn({amount: 22}).

controller

Controller constructor function. The controller is instantiated before the pre-linking phase and it is shared with other directives (see require attribute). This allows the directives to communicate with each other and augment each other's behavior. The controller is injectable (and supports bracket notation) with the following locals:

• $scope - Current scope associated with the element
• $element - Current element
• $attrs - Current attributes object for the element
• $transclude - A transclude linking function pre-bound to the correct transclusion scope. The scope can be overridden by an optional first argument. function([scope], cloneLinkingFn).

require

Require another directive and inject its controller as the fourth argument to the linking function. The require takes a string name (or array of strings) of the directive(s) to pass in. If an array is used, the injected argument will be an array in corresponding order. If no such directive can be found, or if the directive does not have a controller, then an error is raised. The name can be prefixed with:

• (no prefix) - Locate the required controller on the current element. Throw an error if not found.
• ? - Attempt to locate the required controller or pass null to the link fn if not found.
• ^ - Locate the required controller by searching the element's parents. Throw an error if not found.
• ?^ - Attempt to locate the required controller by searching the element's parentsor pass null to the link fn if not found.

controllerAs

Controller alias at the directive scope. An alias for the controller so it can be referenced at the directive template. The directive needs to define a scope for this configuration to be used. Useful in the case when directive is used as component.

restrict

String of subset of EACM which restricts the directive to a specific directive declaration style. If omitted, the default (attributes only) is used.

• E - Element name:
• A - Attribute (default):
• C - Class:
• M - Comment:

template

replace the current element with the contents of the HTML. The replacement process migrates all of the attributes / classes from the old element to the new one. See the Directives Guide for an example.

You can specify template as a string representing the template or as a function which takes two arguments tElement and tAttrs (described in the compile function api below) and returns a string value representing the template.

templateUrl

Same as template but the template is loaded from the specified URL. Because the template loading is asynchronous the compilation/linking is suspended until the template is loaded.

You can specify templateUrl as a string representing the URL or as a function which takes two arguments tElement and tAttrs (described in the compile function api below) and returns a string value representing the url. In either case, the template URL is passed through $sce.getTrustedResourceUrl.

replace

specify where the template should be inserted. Defaults to false.

• true - the template will replace the current element.
• false - the template will replace the contents of the current element.

transclude

compile the content of the element and make it available to the directive. Typically used with ngTransclude. The advantage of transclusion is that the linking function receives a transclusion function which is pre-bound to the correct scope. In a typical setup the widget creates an isolate scope, but the transclusion is not a child, but a sibling of the isolate scope. This makes it possible for the widget to have private state, and the transclusion to be bound to the parent (pre-isolate) scope.

• true - transclude the content of the directive.
• 'element' - transclude the whole element including any directives defined at lower priority.

compile

  function compile(tElement, tAttrs, transclude) { ... }

The compile function deals with transforming the template DOM. Since most directives do not do template transformation, it is not used often. Examples that require compile functions are directives that transform template DOM, such as ngRepeat, or load the contents asynchronously, such as ngView. The compile function takes the following arguments.

• tElement - template element - The element where the directive has been declared. It is safe to do template transformation on the element and child elements only.

• tAttrs - template attributes - Normalized list of attributes declared on this element shared between all directive compile functions.

• transclude - [DEPRECATED!] A transclude linking function: function(scope, cloneLinkingFn)

Note: The template instance and the link instance may be different objects if the template has been cloned. For this reason it is not safe to do anything other than DOM transformations that apply to all cloned DOM nodes within the compile function. Specifically, DOM listener registration should be done in a linking function rather than in a compile function.

Note: The transclude function that is passed to the compile function is deprecated, as it e.g. does not know about the right outer scope. Please use the transclude function that is passed to the link function instead.

A compile function can have a return value which can be either a function or an object.

• returning a (post-link) function - is equivalent to registering the linking function via the link property of the config object when the compile function is empty.

• returning an object with function(s) registered via pre and post properties - allows you to control when a linking function should be called during the linking phase. See info about pre-linking and post-linking functions below.

link

This property is used only if the compile property is not defined.

  function link(scope, iElement, iAttrs, controller, transcludeFn) { ... }

The link function is responsible for registering DOM listeners as well as updating the DOM. It is executed after the template has been cloned. This is where most of the directive logic will be put.

• scope - Scope - The scope to be used by the directive for registering watches.

• iElement - instance element - The element where the directive is to be used. It is safe to manipulate the children of the element only in postLink function since the children have already been linked.

• iAttrs - instance attributes - Normalized list of attributes declared on this element shared between all directive linking functions.

• controller - a controller instance - A controller instance if at least one directive on the element defines a controller. The controller is shared among all the directives, which allows the directives to use the controllers as a communication channel.

• transcludeFn - A transclude linking function pre-bound to the correct transclusion scope. The scope can be overridden by an optional first argument. This is the same as the $transclude parameter of directive controllers. function([scope], cloneLinkingFn).

Pre-linking function

Executed before the child elements are linked. Not safe to do DOM transformation since the compiler linking function will fail to locate the correct elements for linking.

Post-linking function

Executed after the child elements are linked. It is safe to do DOM transformation in the post-linking function.

Attributes

The Attributes object - passed as a parameter in the link() or compile() functions. It has a variety of uses.

accessing Normalized attribute names: Directives like 'ngBind' can be expressed in many ways: 'ng:bind', data-ng-bind, or 'x-ng-bind'. the attributes object allows for normalized access to the attributes.

• Directive inter-communication: All directives share the same instance of the attributes object which allows the directives to use the attributes object as inter directive communication.

• Supports interpolation: Interpolation attributes are assigned to the attribute object allowing other directives to read the interpolated value.

• Observing interpolated attributes: Use $observe to observe the value changes of attributes that contain interpolation (e.g. src="{{bar}}"). Not only is this very efficient but it's also the only way to easily get the actual value because during the linking phase the interpolation hasn't been evaluated yet and so the value is at this time set to undefined.

function linkingFn(scope, elm, attrs, ctrl) {
  // get the attribute value
  console.log(attrs.ngModel);
 
  // change the attribute
  attrs.$set('ngModel', 'new value');
 
  // observe changes to interpolated attribute
  attrs.$observe('ngModel', function(value) {
    console.log('ngModel has changed value to ' + value);
  });
}

Below is an example using $compileProvider.

Note: Typically directives are registered with module.directive. The example below is to illustrate how $compile works.

Source

Demo

Usage

$compile(element, transclude, maxPriority);

Parameters

Returns

    var element = $compile('<p>{{total}}</p>')(scope);
  

    var templateHTML = angular.element('<p>{{total}}</p>'),
        scope = ….;
 
    var clonedElement = $compile(templateHTML)(scope, function(clonedElement, scope) {
      //attach the clone to DOM document at the right place
    });
 
    //now we have reference to the cloned DOM via clone