title: 安装 description: keywords:

  • rancher
  • rancher中文
  • rancher中文文档
  • rancher官网
  • rancher文档
  • Rancher
  • rancher 中文
  • rancher 中文文档
  • rancher cn
  • 常见问题
  • 安装

Agent 无法连接 Rancher server

ERROR: https://x.x.x.x/ping is not accessible (Failed to connect to x.x.x.x port 443: Connection timed out)

  1. ERROR: https://x.x.x.x/ping is not accessible (Failed to connect to x.x.x.x port 443: Connection timed out)

在cattle-cluster-agent或cattle-node-agent中出现以上错误，代表 agent 无法连接到 rancher server，请按照以下步骤排查网络连接：

  • 从 agent 宿主机访问 rancher server 的 443 端口，例如：telnet x.x.x.x 443
  • 从容器内访问 rancher server 的 443 端口，例如：telnet x.x.x.x 443

ERROR: https://rancher.my.org/ping is not accessible (Could not resolve host: rancher.my.org)

  1. ERROR: https://rancher.my.org/ping is not accessible (Could not resolve host: rancher.my.org)

在cattle-cluster-agent或cattle-node-agent中出现以上错误，代表 agent 无法通过域名解析到 rancher server，请按照以下步骤进行排查网络连接：

  • 从容器内访问通过域名访问 rancher server，例如：ping rancher.my.org

这个问题在内网并且无 DNS 服务器的环境下非常常见，即使在/etc/hosts 文件中配置了映射关系也无法解决，这是因为cattle-node-agent从宿主机的/etc/resolv.conf 中继承nameserver用作 dns 服务器。

所以要解决这个问题，可以在环境中搭建一个 dns 服务器，配置正确的域名和 IP 的对应关系，然后将每个节点的nameserver指向这个 dns 服务器。

或者使用HostAliases

  1. kubectl -n cattle-system patch  deployments cattle-cluster-agent --patch '{
  2.     "spec": {
  3.         "template": {
  4.             "spec": {
  5.                 "hostAliases": [
  6.                     {
  7.                       "hostnames":
  8.                       [
  9.                         "{{ rancher_server_hostname }}"
  10.                       ],
  11.                       "ip": "{{ rancher_server_ip }}"
  12.                     }
  13.                 ]
  14.             }
  15.         }
  16.     }
  17. }'
  19. kubectl -n cattle-system patch  daemonsets cattle-node-agent --patch '{
  20.  "spec": {
  21.      "template": {
  22.          "spec": {
  23.              "hostAliases": [
  24.                  {
  25.                     "hostnames":
  26.                       [
  27.                         "{{ rancher_server_hostname }}"
  28.                       ],
  29.                     "ip": "{{ rancher_server_ip }}"
  30.                  }
  31.              ]
  32.          }
  33.      }
  34.  }
  35. }'

创建 Kubernetes 集群，ETCD 无法启动

通过rke 创建 Kubernetes 集群，集群状态为Provisioning，并且 UI 显示如下错误信息：

  1. [etcd] Failed to bring up Etcd Plane: etcd cluster is unhealthy: hosts [10.0.2.15] failed to report healthy. Check etcd container logs on each host for more information

查看 etcd 日志，显示如下错误信息：

  1. 2020-05-25 08:43:41.515364 I | embed: ready to serve client requests
  2. 2020-05-25 08:43:41.523589 I | embed: serving client requests on [::]:2379
  3. 2020-05-25 08:43:41.536538 I | embed: rejected connection from "10.0.2.15:39550" (error "tls: failed to verify client's certificate: x509: certificate signed by unknown authority (possibly because of \"crypto/rsa: verification error\" while trying to verify candidate authority certificate \"kube-ca\")", ServerName "")
  4. 2020-05-25 08:43:46.545930 I | embed: rejected connection from "10.0.2.15:39554" (error "tls: failed to verify client's certificate: x509: certificate signed by unknown authority (possibly because of \"crypto/rsa: verification error\" while trying to verify candidate authority certificate \"kube-ca\")", ServerName "")
  5. 2020-05-25 08:43:51.554070 I | embed: rejected connection from "10.0.2.15:39556" (error "tls: failed to verify client's certificate: x509: certificate signed by unknown authority (possibly because of \"crypto/rsa: verification error\" while trying to verify candidate authority certificate \"kube-ca\")", ServerName "")
  6. 2020-05-25 08:44:34.072012 I | embed: rejected connection from "10.0.2.15:39703" (error "EOF", ServerName "")
  7. 2020-05-25 08:44:46.520865 I | embed: rejected connection from "10.0.2.15:39560" (error "tls: failed to verify client's certificate: x509: certificate signed by unknown authority (possibly because of \"crypto/rsa: verification error\" while trying to verify candidate authority certificate \"kube-ca\")", ServerName "")

以上报错是因为证书的问题，导致 etcd 启动失败。原因主要有两种可能：

  1. 主机时钟不同步
  2. 该主机之前添加过 kubernetes 集群，在残留数据没有清理干净的情况下重新安装集群。

解决办法：

  1. 检查主机时钟，并使各主机时钟同步。
  2. 参考清理节点说明，将主机数据残留数据清理干净，然后再从新添加集群。