Online Mode

Codecraft 2.X

Upload code
1) After writing the program, click “upload” to upload the program to the device.

Online mode
In online mode, you can control the device without uploading code.
1) connecting device (refer to connecting device)
2) drag blocks to the programming area
3) open online mode

Codecraft 1.X

3.4.1 Upload code
After programming, you can click “Upload” button to upload the written code.

3.4.2 Online mode
Under the online mode, you can control the device without uploading code.
1）Connect with the device(Please refer 5.1 Connect with the device).
2）Drag blocks to the Scripts area.
3）Click any block to run the device.

3.4.3 Interactive with Stage mode
Add the device related blocks in Stage mode.
1) Switch to the Stage mode, click the Motion category, drag “move 10 steps” block to the Script area.

2）Choose the Grove Zero category, drag “when 1 Twin Button A clicked” block above the”move 10 steps”block.

3) Connect with the device, run the program, press the A button on Twin Button module, a heart will be shown on the LED matrix accordingly.